Description 200kW Haitai-Sinotruk Natural Gas GenSet HTG-200GF
Are you still wasting time looking for Natural Gas Genset suppliers?
Do you still worry about product quality assurance?
Are you late in deciding to buy because of insufficient budget?
If you have these worries, stay and see.
NEW 200kW Haitai Sinotruk Natural Gas GenSet HTG-200GFIndustrial HAITAI SINOTRUK Series Gas Generator adopting advanced control system, the Sinotruk gas engine will be more reliable, and easier to start. Burn green energy with low emission and environment friendly. Several gas generators can be paralleled together, which can increase the total power range. In addition, the gas gensets can take maintenance in different times, which will make little influence to the normal.
Fuel Types Natural Gas including Biogas, LPG
50Hz Applications
Prime Power(k W/kVA) 200/250
Engine Model T12D-1
Rotation Speed (RPM) 1500
Advantages of Haitai Sinotruk Natural Generator Set - Main parts like ECU, Gas Mixer, Pressure Regulator, etc are origin made in USA& Italy.
- High efficiency and Cost effective
- Low Emissions due to advantage technologies
- Low space requirement due to compact design
- Reliable service life resulting from application-specific design
- Powerful to ensure uninterrupted operation
- Adapt to harsh conditions
Generator Supply Scope:1) High Performance Gas Engine.
2) Brushless Alternator With AVR .
3) Digital Control Cabinet .
4) Weather-proof Cabinet, Steel Base Frame With Shock Absorber.
5) High performance Gas Pressure Regulator Made In Italy.
6) Advanced Ignition System.
7) IMPCO Air-Fuel Mixer Made In USA
8) Stable Electronic Speed Governor.
9) High Performance Flame Arrester.
10) Safely Explosion-proof System.
11) MCCB, Radiator Fan, Muffler, Air Filter.
12) 2*12V Non-Maintenance Start Batteries.
13) Installation Accessories, Tool Kit & Manual Books.
Gas Required
1) Gas Pressure range 0.8-30kpa; Ambient temperature: < 40 deg.C; Sea level: < 1000m; Humidity ratio: <60%.
2) More than 80% CH4 Content, No H2O, H2S < 50ppm, NH3 < 40ppm, Dust < 5µm.
3) Lubricating oil: 15w/40CD/F suggested.
The specification of the 200kW Haitai-Sinotruk Natural Gas GenSet HTG-200GF
Genset Model HTG-200GF
Prime Power(k W/kVA) 200/250
Engine Model T12D-1
Engine: In line,water cool,dry cylinder liner,turbo charged inter
cooling,electric control, regulate press gas control,spark plug
ignition and lean-burn
Cylinder No. 6 in line
Bore ×Stroke 126×155mm
Displacement 11.6L
Start Method Electric
Compression rate 11:1
Crankshaft Rotation Direction Inverse Hour (From Flywheel)
Cooling Method Closed Water Cooling
Aspiration Type Turbo charged
Gas Mixer Formation Pre-Mix
Rated Fue Consumption (m³/Kw·h) 0.3
Average Piston Speed 7.75m/s
Lubricating oil Temperature <80℃
Speed Governor Electronic
Controller Auto PLC controller
Gas Consumption 0.3m³/kW·h
Alternator Model Stamford/HCI 444C1
Excitation Type Brushless
Cooling Air cooled
Protection Class IP21
Voltage Regulation Mode AVR (Automatic)
Sea-Level<1000m, Temp<40deg.
Bore*Stroke (mm) 126 x 155
DSPL. (L) 11.596
Rotation Speed (RPM) 1500
Overall dimension (LxWxH)(mm)/ Open 2900*1000*1500
Overall dimension (LxWxH)(mm) /Silent 3400*1150*1850
Dry Weight (kg)2000/2600
Control Panel
AGC 150 is a controller containing all necessary functions for protection and
control of a genset, a mains breaker, and a bus tie breaker.
It can be used as a single controller for one genset, or a number of controllers can be connected in a
complete power management system for synchronising projects, island applications or running parallel to mains.
AGC 150 is an economical solution for genset builders, who need a flexible generator protection and controller for small to large genset applications.
AGC 150 contains all necessary 3-phase measuring circuits, and all values and alarms are presented on the sunlight readable LCD display
Attachment (Optional Parts)
20ft Container canopy
Scientific and efficient Special sand-proof waterproof blinds with illumination.
Soundproof Canopy
(Super Silent canopy)Containerized Canopy
CHP system (Exhaust Heat Collector)
1. The unique spiral winding structure increases the turbulence effect, and the heat exchange capacity per unit area is 3-7 times that of the traditional heat exchanger.
2. High heat transfer coefficient, high heat exchanger heat transfer efficiency, good heat transfer effect, high heat transfer coefficient up to 14000W/m·k, energy saving effect is remarkable.
3. Small size. With only one-tenth of the traditional tube and shell heat exchangers, it takes up less space and reduces infrastructure and installation and maintenance costs.
4. Using a small clearance design to increase the flow rate, the heat exchanger is not easy to foul, and the use and maintenance costs
are low.
5. Advanced design concept, the length of the heat exchange tube is 3-4 times the height of the cylinder, the material stays longer and the
heat transfer is more fully.
6. Spiral-wound elastic tube bundle design can effectively eliminate pipe vibration and stress due to thermal expansion and contraction deformation.
7. Unique 90 degree connection, heat exchangers all participate in heat exchange,
no dead ends and stagnant areas, reduce fluid resistance.
8. Counter-current heat transfer, asymmetric flow design, in the vapor-liquid heat transfer field has other advantages that can not be compared with heat exchangers.
Automatic Paralleling and Gridconnect Control System
This system can connect generator sets in parallel or connect the generator set to the grid automatically.
CHP/Cogeneration/CCHP/Trigeneration
Remote Control
PMG Alternator
Oil and Water Heater
High Voltage Alternator 6.3kv and 10.5kv, High Voltage Electrical Control Cells (PT Cabinet
CT Cabinet
High Voltage outgoing cabinet
DC Panel, Groud Resistance Cabinet and low voltage distribution cabinet etc)